This DIY custom kitchen drawer organizer was so easy to make and cost less than $10 for the entire project. I am SO THRILLED with how much better my kitchen drawers look!! They drove me crazy when they were a jumbled mess! I was constantly digging through junk and could never find what I was looking for in the tangle of whisks and tongs and spatulas.
Now with these custom drawer dividers everything is perfectly organized and easy to find. And I’m not a big DIYer, so I’m telling you, if I have the patience to do this, I promise you can do it too!!
Here’s another look at my kitchen drawers before. This was a great drawer with tons of storage space. But it definitely needed some drawer dividers! With no dividers, everything was just a jumbled mess.
Diy Drawer Organizer (removable!)
I knew it had potential, and I kept thinking someday I’d get a drawer organizer for it. The problem with pre-made drawer organizers is that the slots are never big enough and never where I want them to be. And custom drawer organizers are expensive and can take a long time to custom order!
I had an idea one afternoon to make my own kitchen drawer organizer and had my brand new drawer dividers the very same day.
First I removed the drawer, took everything out, and sorted everything in the drawer by type: scoops, whisks, spatulas, cutters, etc. Then I placed everything back in the drawer, arranging it like a puzzle so they would all fit.
Diy Custom Kitchen Drawer Organizers
I used Jenga blocks as barriers to give me an idea of where the dividers would go. At first I was going to use masking tape, but Kevin suggested I use Jenga blocks, and I am never one to argue with board games.
They also have different types of wood: aspen, pine, red oak, etc, if you’re looking for a different type or color of wood.
When we got home, Kevin cut the boards to size. He used a skill saw. We’re not big DIYers, so that’s the only kind of saw he had. If you know your measurements, Lowe’s will also cut the boards for you! Then we set the boards back in the drawer to make sure they’d fit.
Diy Drawer Organizer
Finally it was time to glue everything together. We used Locite Clear Power Grab Heavy Duty adhesive. LOVED that it dried clear!! When we first put it on, you could definitely see a ton of the glue in the cracks. We smoothed out the glue along the seams (like you would do caulk) and it dried totally clear. You’d never even know it had been there.
Okay, here’s a sneak peek at another drawer organizer we did. I’m showing you this one because I forgot to take a photo of this step for the other drawer! Anyway, this is just to show you how we glued everything together. We lined the drawer with newspaper so we wouldn’t drip glue on the inside of the drawer, then glued the dividers together, using the drawer as our guide.
We did not glue the boards to the drawer because I wanted the drawer dividers to be removable. I didn’t want to do anything permanent to the drawers.
C.o.p. Week 5
We glued the boards to each other while the drawer held the boards in place. Using the drawer as a guide helped hold the shape of the dividers and keep the pieces lined up so we knew we were still on track.
Here are the organizers out of the drawers. Totally removable! They fit snugly inside the drawers and don’t move around once inside the drawer. But if we ever wanted to take them out for any reason (like to clean the drawer) they just lift right out.
Since we had the drawer out anyway, we also installed full extension drawer slides, which are an absolute must for getting the most real estate out of your drawers. We would not have been able to use that back storage slot (with the funnel and pizza cutter) without full extension drawer slides.
Diy Drawer Organizer With Adjustable Dividers
While we were at it, we also organized our cutlery drawer. Here’s what it looked like before. It was okay, but you can see my knives and some of the other utensils were too big and hung over the edge of those cheap plastic trays.
And here’s what the looks like now with our custom kitchen drawer organizer. So much better! We installed the full extension drawer slides here too. You can see it opened up a whole new back storage slot. And now nothing is hanging over the edge.
Make sure you have WD-40 on hand if you are going to install new drawer slides. We had to generously spray the new slides with WD-40 and open and shut the drawer about 100 times to get it opening and closing smoothly again.
Amazon.com: Bofoho Drawer Divider Adjustable Diy Storage Organizer Separator For Tidying Clutter Cutlery Makeup Clothes Of Dresses, Desk & Box In Kitchen Bathroom Bedroom Office (cut At Will) (white 16pcs)
Five year update! Many of you have asked how these drawer organizers are holding up. Five years later we are STILL using these same drawer dividers!
If you enjoyed this post, follow us day-to-day on Instagram @! Tag your recipes and travels with #. We'd love to see what you're sharing!
We love to travel and to eat! Here we share our favorite quick and easy recipes, plus travel tips and guides for our favorite places around the world. If you have any questions about what camera I use or how I edit my photos, check out my photography tutorials.Today I’m going to show you how I made a custom DIY Drawer Organizer with only four affordable tools. I’ll walk you through the process step by step from planning to completion so you can easily make your own custom drawer organizer too.
Amazon.com: Vesici 80 Pcs Drawer Dividers Adjustable Drawer Organizer Plastic Drawer Dividers Organizer Diy Drawer Separators Storage Dividers For Socks, Underwear, Makeup, Tidy Kitchen, Bedroom, Dresser (white)
This is the second project in my 3 Easy DIY Kitchen Organization series. I designed the projects in this series so that they’re easy for beginners or folks with limited tools to be able to complete. With just a few pieces of wood and some simple tools you’ll be amazed at what you can make!
For this project I’m taking on one of the most used drawers in our kitchen, the silverware drawer. But this would be perfect for any drawer in your home, especially a junk drawer or other hard to tame spots.
We had one of those cheap plastic dividers in our silverware drawer, but things slid around and the openings weren’t exactly the right size for our needs. But a custom drawer organizer will fix that!
Diy Kitchen Drawer Organizer Ideas Story
To begin, I took the tray and all the stuff out of the drawer. Then I laid out where I’d want the things we use the most to go. My wife had some crafting tape and we used it to mark where the diy drawer dividers would go. Be sure to check out the free plans for this project! You may need to adjust them based on your drawer space and your needs, but it’s a great place to start.
I’m using ½” thick poplar for this project and I used three of these 2.5” wide, 3 foot long boards which was just over $11.
I decided to make the drawer organizer in sections and then join them all together. I’m starting with the openings for the forks and spoons. It’s made up of a top piece and two dividers the same length.
Easy Diy Drawer Dividers (using What You've Got!)
Using a 2×4 clamped to the worktable gave me a good reference to keep things steady while I was drilling, but it’s not the greatest solution for driving in screws. When I started securing the pieces together the twisting force of the screw wanted to turn the divider.
I was able to get around this somewhat by partially driving in the first screw then putting the second one and coming back to tighten up the first one.
I cut the parts for the longer utensil bays which just makes a basic T-shape. But this time instead of using the 2×4 as a backstop, I clamped the board to it. This kept the board from turning and at the same time held it square at 90 degrees.
How To Build Diy Drawer Dividers
I cut a long piece that will go between the large and small utensil bays then took them back to the drawer to mark for joinery.
The key to assembling these dividers is doing it in the right order so you aren’t trying to fit a drill into a 3” opening to attach a part…cause that’s not gonna happen!
On the long board the screws are on the side and would be seen in use. So I drilled using my countersink bit which leaves a deeper opening to allow room for a plug.
How To Organize Your Kitchen Drawers: 20 Ideas To Tame The Clutter
These little ⅜” flat bottom plugs will fit perfectly right in the hole left by the countersink. With a dab of wood glue and a hammer you can fit them right in.
And you could sand these flush here, but a better way is to use a flush trim saw. This little guy is about 15 bucks and has super fine teeth. It saws right through the plugs and with a little sanding they are perfect.
I drilled and attached the large utensil bay the same way, plugging the holes since they are
0 Comments
Posting Komentar