You’re standing in front of your brand new or freshly painted cabinets. You know you want gorgeous drawer pulls and cabinet knobs to complete the look, but there’s only one thing standing in the way…
Just the thought of putting holes in that unmarred surface gives you second thoughts and you start wondering if you really need hardware at all, or if you should hire a pro to save you from yourself.
You can totally do this yourself. It can be scary drilling holes in your brand new cabinets, but don’t let a little intimidation stand in the way of fulfilling your vision. You can drill those holes, and the cabinets will be even better for it.
How To Install Cabinet Handles When I Can't Fit A Screw In From The Opposite Side
You just need a few tips to get you started in the right direction and give you the confidence you need to attack this project. Only a few nerve-wracking minutes separate you from the completion of your whole project!
This post contains affiliate links. If you make a purchase, I may receive a small commission at no additional cost to you.
This was me last week, putting the finishing touches on our master bathroom makeover. Instead of replacing the vanity, I painted it a dark gray (Valspar Crucible) and the finish looked so smooth and pretty.
Where Should Drawer Handles Be Placed?
I had a drill in one hand and a package of the prettiest brass handles in the other, and it took everything I had in me to drill that first hole.
It can be really scary drilling holes in your brand new beautiful cabinets. Whether you painted old cabinets or got brand new ones, you don’t want to do anything to disturb the untouched finish.
The answer is: It depends. On style, preference, and usability. In the end it’s totally up to you, but here are a few things to consider when trying to decide.
How To Install Cabinet Drawer Handles
No matter how good your paint job is, it will probably pick up a few blemishes over time, especially in high traffic areas, where everyone is opening and closing that cabinet a million times a day.
In my experience, not everyone is as careful with my masterpiece, I mean my cabinets, as I am. Here’s my kitchen trash cabinet, which is due for a touch-up:
Hardware also calls attention to the design of the cabinets. When you update a kitchen or bathroom, the cabinets make up a big chunk of your design style.
Kitchen Cabinet Hardware Ideas For Every Design Style
Once they’re installed or updated, you want the biggest bang for your design buck, so you pick something pretty to bring out the effect of the lines and curves of the cabinets.
If you are NOT trying to emphasize your cabinets for some reason, or if their style doesn’t lend itself to knobs and pulls (like a super-sleek mid-mod design), you might want to skip the hardware.
Finally, the most fun reason to use hardware is the same reason we decorate birthday cakes – to celebrate. It’s like jewelry. You can have a great outfit, but it still needs a little something before you walk out the door to that dinner party.
Comprehensive Guide To Cabinet Hardware: Size & Placement
But you get my point. Sometimes the smallest details can bring out the look of the whole room and finish it off with the perfect amount of bling.
Like my brass pulls that match my new sink faucets. They make the touches of gold make sense and stand out just the right amount against the dark finish of the cabinets.
Personally, I always vote in favor of adding hardware to cabinets. It’s the perfect meeting of form and function, providing a service while elevating the style of your space.
How To Install Kitchen Handles Like A Pro
By the way, I got these drawer pulls and cabinet knobs on final clearance from Target, but if you’re looking for a larger selection or specialty pieces, I always recommend D. Lawless hardware. (That’s not an affiliate link, I just think they’re great.)
To install your cabinet hardware correctly, you’ll first need a template. This can be a plastic template designed exactly for this purpose, or a simple cardboard template that you make yourself.
I do this kind of project often enough that I decided to buy one instead of making one each time. Even if you’re only doing one kitchen, the little plastic templates are so handy, and cheap enough that it’s probably worth picking one up.
How To Center Drawer Handles
If you decide to make your own cabinet hardware template, simply hold up a piece of cardboard to the location of your first knob, with the edges lined up to the edges of your cabinet and drill a hole through the cardboard. That will be where you mark all your other holes on each cabinet.
You’ll need a different template for drawer pulls. You’ll make it the same way, but with a hole for each drawer pull screw.
Measuring for cabinet and drawer pulls can be a little intimidating. This is definitely one time you’ll want to measure twice, cut once.
How To Fill Recessed Drawer Pulls?
First, decide where you want the hardware to go on each door and drawer. This decision is totally up to you, but I like to center everything, meaning I measure the same distance from the top of the cabinet as from the side.
Design Tip: Make sure that your door pulls look nicely balanced when a pair is lined up together. You don’t want them too close to each other, which could look crowded. So if you have larger pulls, you might want to separate them a little.
Once you’ve figured out the look you want, hold your template up to a cabinet door, and settle it along the edges of the door. Use a Sharpie to mark a circle around the hole you’ll be using.
How To Install Cabinet Handles Accurately And Efficiently
Flip your template over and mark a matching dot on the cabinet door that meets the first one, so you have a matched pair.
To mark the drawer pulls, line up the template in the middle of the drawer, with the edge of the template overlapping either the top or the bottom of the drawer.
To find the center of the drawer, take the total measurement of the drawer front from left to right, and divide that number in half. (My drawers are 18″ wide, so the halfway point is 9″.) Line up the center mark of the template on this halfway number.
Make Your Own Faux Marble Drawer Knobs
Now stand back and eyeball the dots. Make sure they line up together and look balanced, centered, and level. If anything seems off, now’s the time to fix it!
(You can remove Sharpie marks with alcohol, but always test this first on the inside of a cabinet door, to make sure it doesn’t mess up your finish. If your cabinets are white or light colored, you could use a pencil instead of a Sharpie.)
Fit the correct drill bit into your drill. This is usually a 3/16″ for standard cabinet hardware screws, but check yours first to make sure that’s the correct size.
The Quickest And Most Consistent Way To Install Cabinet Hardware
Line your drill bit up to the hole you marked on the front of the cabinet door. Holding the drill as level as possible, slowly start drilling a hole. Keep the drill level to help your hardware line up correctly.
Drilling from front to back will keep the wood from splintering on the front of the door. The back may splinter a bit as the drill comes through the back of the door, but this will mostly be covered by the head of the screw, and it won’t be visible from the front anyway.
If you want to be extra cautious with the finish on the front of your cabinets, use tape to keep the wood from splintering as you drill. Simply put a small piece of tape on the front of the area you’re drilling, and mark your holes on each piece of tape. Once you’ve drilled the hole, you can remove the tape before applying the hardware.
How To Install Cabinet Hardware Without Losing Your Mind
When you’re adding the hardware, it’s a good idea to hold the knob to the front of the door, and tighten the screw at the back.
If you’re like me, you’ll want to hold the back screw and twirl the front piece onto it. But as it twists onto the wood, it could mess up your new paint finish at the very end.
Simply hold the front with your fingers and screw from the back. You may need a screwdriver to tighten the last bit.
C Clamp, Heavy Duty C Clamp 304 Stainless Steel Adjustable Cabinet Installation Clamps Cabinetry Clamps Tools Drill Hole Guide Design For Easy And Fast Installing Frame Of Cabinets Drawer (2 Pack)
Wrong Screws: On my custom cabinets, I found that the drawer fronts are thicker than standard drawer fronts, so the screws that came with my drawer pulls weren’t long enough.
After a moment of panic, I realized I just needed to get longer screws to fit. I found that machine screws #8 were just the right diameter to fit the standard hardware I had, and they come in several lengths. Problem solved.
Wrong Holes: If you did happen to put a hole in the wrong place, first of all you’d be in good company. Been there, done that. It’s not the end of the world, although it might feel like it for a minute.
How To Install Traditional Cabinet Hinges
Simply fill the hole with wood filler. Once it’s dry, sand lightly. Then you can repaint or re-stain the area to match your cabinet finish.
Since installing drawer pulls and door knobs
0 Comments
Posting Komentar